
Le projecteur 4K PT-FRQ50 1 puce™ PT-FRQ50 de 5 200 lm offre des images fluides et détaillées pour une expérience visuelle impressionnante
Spécifications du produit
|
PT-FRQ50 |
---|---|
TYPE DE VIDÉOPROJECTEUR | Projecteur Mono DLP™ |
Puce DLP™ | |
- DLP™ CHIP I Taille de la dalle |
16,5 mm (0,65 po) de diagonale (format 16:9) |
- DLP™ Chip I Méthode d’affichage |
Puce mono DLP™, système de projection DLP™ |
- DLP™ CHIP I Nombre de pixels*1 |
1920 x 1080 pixels |
Source lumineuse |
Diodes laser |
Puissance lumineuse*2*3 |
5 200 lm |
Temps jusqu’à ce que la puissance lumineuse diminue à 50 %*4 |
20 000 heures (NORMAL/SILENCIEUX)/24 000 heures (ECO) |
Résolution |
4K (3840 x 2160 pixels) (avec Quad Pixel Drive) |
Rapport de contraste*2 |
20 000:1 (Full On/Full Off) |
Taille de l’écran (diagonale) |
1,02 à 7,62 m (40 à 300 po), format 16:9 |
Rapport de zone centre-coin*2 | 90 % |
Optique |
Zoom manuel 2,0x (rapport de projection : 1,46–2,93:1), mise au point manuelle, F 2,0–3,4, f 21,5–43,0 mm |
LENS SHIFT (À partir du point d’origine de la monture d’objectif) |
|
- Vertical |
+71 %, -48 % (manuel) |
- Horizontale |
+34 %, -27 % (manuel) |
Plage de correction keystone | Vertical: ±40 °, Horizontal: ±20 ° |
Installation |
Plafond/plancher, avant/arrière, installation libre à 360 degrés |
PORTS | |
- Entrée HDMI |
HDMI 19 broches x 2 (Compatible avec HDCP 2.3, Deep Color, entrée de signal 4K/60p*5),CEC pris en charge |
- Entrée Computer |
D-sub HD 15 broches (femelle) x 1 (RGB/YPBPR/YCBCR) |
- Sortie du moniteur |
D-sub HD 15 broches (femelle) x 1 (RGB/YPBPR/YCBCR) |
- Entrée/Sortie audio |
Mini-jack stéréo M3 x 2 |
- Port Série Entrée |
D-sub 9 broches (femelle) x 1 pour le contrôle informatique (compatible RS-232C) |
- DIGITAL LINK/LAN |
RJ-45 x 1 pour la connexion réseau et DIGITAL LINK (contrôle vidéo/réseau/série) (compatible HDBaseT™), 100Base-TX (Compatible avec PJLink™, [Class 2] Art-Net, HDCP 2.3, Deep Color, entrée de signal 4K/60p*6) |
- LAN |
RJ-45 x 1 pour connexion réseau, 10Base-T, 100Base-TX (Compatible avec PJLink™ [Class 2] , Art-Net) |
- USB |
Connecteur USB (Type A) x 1 (sortie 5 V/2 A) |
Alimentation | AC 100–240 V, 50/60 Hz |
Consommation d'énergie |
480 W |
Matériaux du chassis |
Plastique moulé |
Bruit de fonctionnement*2 |
35 dB (NORMAL/ECO) / 28 dB (SILENCIEUX) |
Dimensions |
498 x 168 x 492 mm (19 5/8 ̋ x 6 5/8 ̋ x 19 3/8 ̋ ) |
Poids*8 |
Environ 16,1 kg (35,5 lb) |
Environnement opérationnel |
Température de fonctionnement: 0–45 °C (32–113 °F*9), humidité de fonctionnement: 10–80 % (pas de condensation) |
Logiciels applicables |
Logiciel de Transfert de Logo, Logiciel de Multi Monitoring et de contrôle , Logiciel d’Alerte Précoce, Geometry Manager Pro*10 |
*1 Si un signal autre que 120 Hz/240 Hz est entré, il ne peut pas être affiché à cette résolution.
*1 La mesure, les conditions de mesure et la méthode de notation sont toutes conformes aux normes internationales ISO/IEC 21118: 2020. La valeur est la moyenne de tous les produits lorsqu’ils sont expédiés.
*3 Quand [PICTURE MODE] est défini sur [DYNAMIC] et [LIGHT POWER] est défini sur [NORMAL] .
*3 À peu près à cette période, la puissance lumineuse aura diminué à environ 50 % de son niveau initial ( : , réglé à , température 35 °C (86 °F), altitude 700 m (2 297 pi) avec 0,15 mg/m3 de particules). Le temps estimé jusqu’à ce que le rendement lumineux diminue à 50 % varie en fonction de l’environnement.
*5 signaux 4K/60p sont convertis à la résolution du projecteur lors de la projection.
* 6 L’entrée de signal 4K / 60p est convertie dans la résolution du projecteur et prend en charge le format YPBPR 4: 2: 0 uniquement.
*7 Avec les jambes complètement rétractées. Fonctionnalité disponible uniquement après mai 2022.
*8 Valeur moyenne. Peut différer selon l’unité réelle.
*8 Lorsque le module sans fil de la série AJ-WM50 en option est connecté, la plage de température de fonctionnement devient de 0 à 40 °C (32 à 104 °F).
*10 Fonctionnalité disponible uniquement après mai 2022.
- Images
- Brochures
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
Projector type | 1-Chip DLP™ projector |
---|---|
DLP™ Chip | Panel Size | 16.5 mm (0.65 in) diagonal (16:9 aspect ratio) |
DLP™ Chip | Display Method | DLP™ chip x 1, DLP™ projection system |
DLP™ chip | Number of Pixels*1 | 1920 x 1080 pixels (If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution.) |
Light Source | Laser diodes |
Light Output*2 *3 | 5,200 lm |
Time until light output declines to 50 %*4 | 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) |
Résolution | 4K (3840 x 2160 pixels) (With Quad Pixel Drive) |
Contrast Ratio*2 | 20,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1]. HDMI signal input) |
Screen Size (Diagonal) | 1.02–7.62 m (40–300 in), 16:9 aspect ratio |
Center-to-corner zone ratio*2 | 90 % |
Lens | 2.0x manual zoom (throw ratio: 1.46–2.93:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm |
Lens shift | Vertical(From the origin point of the lens mounter) | +71 %, -48 % (manual) |
Lens shift | Horizontal(From the origin point of the lens mounter) | +34 %, -27 % (manual) |
Keystone Correction Range | Vertical: ±40 °, Horizontal: ±20 ° |
Terminals | HDMI IN 1/2 | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input 5 ), CEC supported |
Terminals | Computer In | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
Terminals | Monitor Out | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
Terminals | Audio In/Out | M3 stereo mini-jack x 2 |
Terminals | Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
Terminals | DIGITAL LINK/LAN | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input 6 ) |
Terminals | LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) |
Terminals | USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory, and for power supply (DC 5 V, maximum 2 A) |
Power Supply | AC 100–240 V, 50/60 Hz; AC 110 V, 60 Hz (Taiwan) |
Power Consumption | 480 W |
Operation Noise*2 | 35 dB (NORMAL/ECO) / 28 dB (QUIET |
Dimensions (W x H x D)*7 | 498 x 168 x 492 mm (19 5/8˝ x 6 5/8˝ x 19 3/8˝ ) |
Weight*8 | Approx. 16.1 kg (35.5 lbs) |
Operating Environment | Operating temperature: 0–45 °C (32–113 °F 9), operating humidity: 10–80 % (no condensation) |
Applicable Software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro 10 |
Note | *1 If a signal other than 120 Hz/240 Hz is input, it cannot be displayed at this resolution. *2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *3 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. *4 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment. *5 4K/60p signals are converted to the projector's resolution upon projection. *6 4K/60p signal input is converted to projector's resolution, supports YPBPR 4:2:0 format only. *7 With legs fully retracted. *8 Average value. May differ depending on the actual unit. *9 When optional AJ-WM50 Series wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). *10 Feature only available after May 2022. |