Immergez votre public au cœur de l'action ! 
Fusionner l’art et la technologie pour des résultats spectaculaires 
Réinventer Les Musées 
Le divertissement est une affaire sérieuse ! 
Projecteur à installation fixe de la classe 10 000 lumens Couleurs incroyables et grande flexibilité de projection pour les musées, les expositions et la signalisation numérique 2 lampes - Objectif échangeable - RGB Booster dynamique - Digital Link
- Excellente qualité d’image avec nouvelle fonctionnalité RGB Booster dynamique et technologie Vivid Colour Control
- Système à deux lampes avec mode relais assurant une projection ininterrompue 24 h/24 et 7 j/7
- Filtre Eco avec cycle de remplacement pouvant atteindre 12 000 heures
- Luminosité de 8 500 lm
- Résolution WXGA (1 280 x 800)
- Taux de contraste de 10 000:1 (en mode de contraste élevé)
- Fonctionnalité Edge Blending
- Nuançage des couleurs
- RGB Booster dynamique
- DIGITAL LINK
- Compatible 3D
Notre système à deux lampes innovant, avec ses nouvelles ampoules, permet de réduire la taille du boîtier tout en fournissant une luminosité de 8 500 lm en fonctionnement à 220-240 V CA. Grâce au mode « Lamp Relay », le système évite les interruptions si une ampoule venait à griller, garantissant une projection 24h/24, 7j/7.
La technologie RGB Booster dynamique de Panasonic permet également d’obtenir une qualité d’image élevée avec une excellente reproduction des couleurs et une luminosité élevée. De même, le processeur Detail Clarity 3 apporte de la profondeur et de la clarté aux détails.
L’iris dynamique du projecteur fait appel à un mécanisme d’ouverture permettant d’obtenir un excellent taux de contraste de 10 000:1 sans perdre sa luminosité élevée. Il aide à reproduire des noirs plus profonds et plus riches, tout en conférant aux images une texture plus détaillée.
En termes d'entretien et de fiabilité, un bloc optique résistant à la poussière permet de préserver la qualité de l’image, et un nouveau mécanisme de refroidissement, comportant un bloc de dissipation de la chaleur et un caloduc, réduit l’usure de l’appareil. Combiné au cycle de remplacement de lampe pouvant atteindre 3 000 heures, le projecteur réduit le coût de possession et les frais d'entretien.
Pour une intégration optimale du système, la compatibilité DIGITAL LINK permet de transmettre des signaux HDMI, de commande, audio et vidéo non compressés via un seul câble LAN.
- Images
-
Download image - 629.65 KB
-
Download image - 66.02 KB
-
Download image - 74.69 KB
-
Download image - 434.34 KB
-
Download image - 1 MB
-
Download image - 73.3 KB
-
Download image - 571.86 KB
-
Download image - 49.29 KB
-
Download image - 630.57 KB
-
Download image - 126.11 KB
-
Download image - 558.26 KB
-
Download image - 49.37 KB
-
Download image - 559.11 KB
-
Download image - 48.87 KB
-
Download image - 552.38 KB
-
Download image - 47.85 KB
-
Download image - 521.66 KB
-
Download image - 46.12 KB
-
Download image - 534.53 KB
-
Download image - 150.31 KB
-
Download image - 576.3 KB
-
Download image - 53.03 KB
-
Download image - 821.75 KB
-
Download image - 450.44 KB
-
Download image - 692.87 KB
-
Download image - 369.73 KB
-
Download image - 771.3 KB
-
Download image - 462.81 KB
-
Download image - 1.25 MB
-
Download image - 80.95 KB
-
Download image - 74.04 KB
-
Download image - 183.93 KB
-
Download image - 63.12 KB
-
Download image - 992.95 KB
-
Download image - 215.34 KB
-
Download image - 63.63 KB
-
Download image - 524.25 KB
-
Download image - 66.01 KB
-
Download image - 428.71 KB
-
Download image - 3.98 MB
-
Download image - 532.54 KB
Accessories and Software
-
Digital Interface Box -
DIGITAL LINK Switcher -
Lamps -
Brackets
-
Ultra short-throw detachable lens for 1-DLP projectorsET-DLE030Enables large-screen projection from a short distance.
-
Commutateur DIGITAL LINK - intég. commande AVET-YFB200G2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
-
ET-LAD310ALampe 380 W UHM × 1
-
ET-LAD120Lampe 420 W UHM × 1
-
ET-LAD310AW
Lampe 380 W UHM × 2
-
ET-LAD120W
Lampe 420 W UHM × 2
-
ET-LAD120P
Lampe 420 W UHM × 1, Pour mode portrait
-
ET-LAD120PW
Lampe 420 W UHM × 2, Pour mode portrait
-
ET-PKD120SET-PKD120S. .
-
PT-DZ870/DW830/DX100 Operating Instructions (French)Télécharger pdf - 20.13 MBWed, 06/06/2018 - 01:13
PT-DZ870/DW830/DX100 Operating Instructions (Korean)Télécharger pdf - 20.2 MBWed, 06/06/2018 - 01:33![PT-DZ870/DW830/DX100 Operating Instructions [U] (French)](https://business.panasonic.fr/systemes-visuels/system/files/styles/thumbnail/private/files/fields/field_file_thumb/psd/2014/09/02/tn/PT-DZ870U_F_1409674551_tn.png?itok=meEPE6fb)
PT-DZ870/DW830/DX100 Operating Instructions [U] (French)Télécharger pdf - 19.93 MBWed, 06/06/2018 - 01:48
-
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
| Power Supply | 120-240 V AC, 10-5.2 A, 50/60 Hz |
|---|---|
| Power Consumption (120-240V AC, 50/60Hz) | 1,030 W (1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) |
| DLP™ Chip Panel Size | 16.5 mm (0.65 in) diagonal (16:10 aspect ratio) |
| DLP™ Chip Display Method | DLP™ chip x 1, DLP™ system |
| DLP™ Chip Pixels | 1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels |
| Lens PT-DW830K/DW830W | Powered zoom/focus lenses (1.8 - 2.5:1), F 1.7 - 1.9, f 25.6 - 35.7 mm |
| Lens PT-DW830LK/DW830LW | Optional powered zoom/focus lenses and fixed-focus lens |
| Lamp | 420 W UHM lamps (x 2) |
| Screen Size | 1.27 - 15.24 m (50 - 600 inches) (1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)) (2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)) |
| Luminosité | 8,500 lumens (dual lamp, LAMP MODE: NORMAL) |
| Center-to-Corner Uniformity | 90% |
| Contraste | 10,000:1 (full on/full off, in dynamic iris 3 mode) |
| Résolution | 1,280 x 800 pixels(Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.) |
| Scanning Frequency (HDMI/DVI-D) | fH: 15 - 100 kHz, fV: 24 - 120 Hz, dot clock: 25 - 162 MHz |
| Scanning Frequency (RGB) | fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower |
| Scanning Frequency YPBPR (YCBCR) | 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz |
| Scanning Frequency (Video/Svideo) | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Optical Axis Shift | Vertical: +60% (powered), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed. |
| Keystone Correction Range | Vertical ±40° (±30° with the ET-DLE055/DLE085/DLE105.) Cannot be used when the ET-DLE030 is installed. |
| Installation | Ceiling/floor, front/rear |
| Terminals HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals RGB 1 In | BNC x 5 |
| Terminals RGB 1 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 1 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals RGB 1 In S-Video Signal | Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| Terminals RGB 2 In | D-sub HD 15-pin (female) x 1 |
| Terminals RGB 2 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 2 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals 3D Sync 1 In/Out | BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA |
| Terminals 3D Sync 2 Out | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA |
| Terminals Video In | BNC x 1, 1.0 Vp-p, 75 ohms |
| Terminals Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals Serial Out | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| Terminals Remoter 1 In | M3 jack x 1 for wired remote control |
| Terminals Remoter 1 Out | M3 jack x 1 for link control |
| Terminals Remoter 2 In | D-sub 9-pin x 1 for external control (parallel) |
| Terminals LAN/DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Power Cord Length | 3.0 m (9 ft 10 in) |
| Cabinet Materials | Molded plastic |
| Dimensions (W x H x D) PT-DW830K/DW830W | 498 x 200 x 556 mm (19 - 19/32 x 7 - 7/8 x 21 - 7/8 inches) (with supplied lens) |
| Dimensions (W x H x D) PT-DW830LK/DW830LW | 498 x 200 x 513 mm (19 - 19/32 x 7 - 7/8 x 20 - 3/16 inches) (without lens) |
| Weight PT-DW830K/DW830W | Approx. 18.3 kg (40.3 lbs) (with supplied lens) |
| Weight PT-DW830LK/DW830LW | Approx. 17.6 kg (38.8 lbs) (without lens) |
| Operation Noise | 40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO) |
| Température de fonctionnement | 0℃ - 45 ℃ (32℉ - 113 ℉) |
| Operating Humidity | 10% - 80% (no condensation) |
| Technologie | 1-Chip DLP |
| Note | Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *5 With legs at shortest position. *6 Average value. May differ depending on models. *7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector. *8 Operation range differs depending on environments. |
