
The Panasonic AK-HCU355A Camera Control Unit supports high definition 1080/59.94i, 1080/50i, 480/59.94i, 576/50i, 1080/29.97psF (over 59.94i), 1080/23.98psF (over 59.94i), 1080/23.98psF (over 47.96i), 1080/25psF (over 50i), 1080/23.98psF and 1080/25psF output, and 1080/50i/59.94i, 576/50.00i, 480/59.9 RET IN formats. It‘s designed to work with the AK-HC3500A production/studio camera for studio and EFP (electronic field production) applications.
- Images
- Brochures
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
SERVICES & TÉLÉCHARGEMENTS CONTACTER LE SUPPORT TECHNIQUEPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
SERVICES & TÉLÉCHARGEMENTS CONTACTER LE SUPPORT TECHNIQUEThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
SERVICES & TÉLÉCHARGEMENTS CONTACTER LE SUPPORT TECHNIQUEThere are currently no other services available.
Specifications
LAN | For use with PC connections x 1 line (10Base-T, 100Base-TX: Cross cable) |
---|---|
Poids | Approx. 9 kg (Approx. 19.8 lb) |
Dimensions (W x H x D) | 200mm x 120 mm x 445 mm (7-7/8 inches x 4-3/4 inches x 17-9/16 inches) excluding protrusions |
Température de fonctionnement | 0 °C to 40 °C (32 °F to 104 °F) |
Power Supply | DC 12 V AC 100 V to 120 V, 50 Hz/60 Hz (AK-HCU355AP) AC 220 V to 240 V, 50 Hz/60 Hz (AK-HCU355AES/355AE) |
Power Consumption | 37 W (excluding power supply) 340 W (include power supply) |
Operating Humidity | 10 % to 90 % (no condensation) |
Reference Input | Black burst/tri-level x 2 lines (loop-through x 1 line)*2 *3 *5 |
Video Output | HD-SDI/SD-SDI x 4 lines*1 (shared by picture monitor output 1 line*4) Analogue composite x 2 lines (shared by picture monitor output 1 line*4) |
Communication | Intercom input/output(0 dBm, 600 Ω, 2W/RTS/4W*4) x2 lines (ENG/PROD) PGM input (0 dBm/600 Ω) x 2 lines Tally input (Red, Green) x 1 line each |
Trunk | RS-422/RS-232C x 2 lines*4 |
Return Input | HD-SDI/SD-SDI x 4 lines |
Prompter Input | Analogue composite x 2 lines*2 |
Sync Output | Analogue sync, HD (±0.3 V [p-p]) / SD (1 V [p-p]) (with 75 Ω termination) x 1 line*4 |
MIC Output | 0 dBm/600 Ω x 2 lines |
WFM CONT | For WFM control (open collector output) |
AUX | For setting down-conversion system (photo-coupler input) For tally, alarm (open collector output) |
ROP I/F | RS-422 x 1 line, 12 V output |
MSU I/F | RS-422 x 1 line, GPI for control |
Note | *1: Embedded audio is supported only for HD signal output. *2: Prompter input 2 and reference input 2 share the same connector so only one of these inputs can be selected at one time. *3: The black burst signal and tri-level sync signal of reference input 1 are recognized automatically. *4: Depending on the setting, only one of these outputs can be selected at one time. *5: Reference input 2 supports only dual sync tri-level sync signal input when the 23.98PsF format applies. |
Capacity for Supplying Power to a Camera | AC 220V to 240 V, 1.2 A, 50 Hz/60 Hz (AK-HCU355AP) AC 220V to 240 V, 1.2 A, 50 Hz/60 Hz (AK-HCU355AES/355AE) |
WFM Output | Analogue composite x 1 line*2 |